Mobile is currently the computer, the computer is now a substitute for human task.
Computers and humans alike have the brain to process the command and store data information.
Let the computer, humans if too many thoughts will lead to stress even slightly to loss of memory, how about cell phones?
Moreover, the mobile phone has only proccesor and data storage is very limited. Software on the phone there is the operating system, no operating system is perfect a cell phone can cause fatal damage and even death total, without the operating system as well as a complete human being raganya but if his soul is disturbed, especially no life or mind thought, whether humans can live ?
Causes damage android phone:
With the many causes and damage the phone, move and repair procedures will be very different depending on the cause of the damage.
Phone damage usually happens due to:
1. Software problem
2. corrosion and dirt
3. As a result of the collision
4. Component damaged
5. Track dropouts
And a few more things, but what often happens is that five of the above
>>> Due to software problems
Causes of damage:
1. Wrong phone settings
2. Operating system problems
3. The Security code
4. User area & Content pack
The mobile phone comes with settings that can be changed-change, but if the settings are not in accordance with the rules should be, then the phone can not function properly. Mobile phones equipped with a security code that allows to secure the phone from the hands of ignorant, but not infrequently even the phone itself forgotten safety code (backfire is not it?) Whether the mobile phone directly on leave granted? of course not, do Reset to Factory default both of HH or use a computer that has been in the special program for the purposes of the phone software.
As with smartphones, android also provide flexibility in terms of custom, but if the custom is wrong then you android would be problematic.
So if the phone is problematic due to software problems, you do not need to unpack let alone replace components. Just enough reprogrammed cell phone, and the problem is finished with ease. You also do not need to fix the software stored on the phone, but you just remove all the firmware and write back (flashing) using the firmware accordingly. (In this case caused by softbrick, not hardbrick)
In contrast to electronic devices other, the phone is an electronic device that is completely digital with the components are very small and complex, of course, the phone will be very vulnerable to damage, especially cell phones are electronic devices digital communication Mobile, Mobile always carried around by its owner so consciously or unconsciously the phone could be damaged.
Let the phone is impacted or exposed to water, usually mobile phones are always saved wherever the user is important to feel comfortable, often phone is stored in your pocket / pants, sweat or perspiration vapor will be very easy to get into the machine so that the mobile phone into a mobile machine corrosion. Difficult course to avoid dust, the phone will be disrupted performance in the engine when the phone there are impurities that allows dirt willaffect the connectivity between external and internal components so that the phone can not function properly. As a result of environmental factors and weather influence on the humidity so that the moisture content is often the cause of damage to the phone so that surge resulted in a series of elektronikanya. All mobile machinery is very sensitive to corrosion, so it is possible components or ICs in mobile machines become damaged.
70% of mobile working system using computerized systems, software is the software that will determine the performance of the phone like a computer. Until now, the sophistication of mobile phones continues to grow even sophistication is not balanced with expertise in their use, often mobile users tampering phone features without understanding so that the program becomes chaotic even broken mobile phones.
Excessive use of mobile phones such as for example in playing a video game or applicationprogram will lead to a very heavy burden for proccesor phone, so it is not uncommon damaged cell phone suddenly. 60% of current damage caused by software problems, even some cell phones into the total dead or can not boot when switched on.
>>> As a result of corrosion and dirt
Causes of damage:
1. The surge in electronic circuits
2. Interface Pad can not connect well to the phone component
As mentioned in the earlier discussion, that the mobile phone is a highly sensitive electronic equipment against corrosion and dirt, there is little corrosion (rust light) will cause the phone can not function properly. Moreover, the phone is entering the water, can prove fatal !. You need to understand, the water content even become the main cause of corrosion and rust, then in fact when the phone is exposed to water immediately deal with the damage will not be very fatal and will not result in components or ICs in mobile machines becomes damaged, then you should immediately disconnect battrey of the phone to no short circuit occurs (surge) in mobile machinery. Often complaints occur phone keypad is not functioning properly, because these parts are often the cause of water entry to the mobile machine.
>>> As a result of the collision
Causes of damage:
1. Mechanical & Electro-mechanic part is damaged
2. The components not related to either
3. PWB (boards component) bent
Mobile consists of various elements interrelated components menduku
ng each other, one of them: the electronic components and mechanical components. Heavy impact on the mobile phone will usually result in damage to the mechanical components, although physically outside of the phone is not visible significant damage, not least the fact of damage as a result of the electronic components that can not function well, but need to remember not mean the damage is due to the electronic components that has been damaged in a collision, but the electronic components do not function because it is not connected properly. Electronic components of the mobile machine is very small in size so difficult to see with the naked eye damage. When PWB (board machine) bit crooked although it would be very difficult to repair, you should not continue with the repairs because of damage resulting from too many lines had been severed and is unlikely to be reconnected. You need to remember !, phones damaged in a collision, 100% elektronikanya component is still good, especially on ICnya. So should the mobile phone could be your customer to buy from you at a very low price, so that the phone can use as cannibals, so you can be a little frugal.
>>> As a result of faulty components
Causes of damage:
1.Adanya shorting or short-circuit components
2.Komponen not go as function
3.Kesalahan on setting
Component is an important element given the android phone consists of several components into one, if the component is not running according to its function, it should be done so as not to cause the replacement of other components to be damaged as well. For example, if the power control component on your android dd damaged and you let the power in the supply to other components are not in accordance with what is needed this can lead to damaged other components
Errors in settings such as for example excessive overclock can also damage the components due to the imposition of the power supply and the excess capacity on the ability of the components. For this you can perform the replacement of components, but there are some things that are not sold freely by the vendor (in this case, the service center is usually recommended that you replace the engine)
Usually dd android that has replaced the engine, even if replaced by a new engine, but the quality is not excellent as the initial conditions
>>> As a result of broken lines
Causes of damage:
1.Board crooked
Excessive corrosion 2.Adanya
3.Selain path on the PWB, flexible wires can also break up
You can imagine if the road has a bridge and the bridge is broken, so also with your Android phone, if the path to the pwb broken, then your android phone can not be run in accordance with its function can sometimes even cause death total (Matot)
If the condition of the board and other components are still functioning properly, you can do the jumper in accordance with the flow interrupted (my advice do testing with a multimeter and see schemes phone hardware before making a jumper, can also be seen from the pwb are functioning normally and then do the jumper) If the process Jumpers wrong, there will be a short or a short-circuit, therefore be careful in making jumper
If the break up of flexible cables do replacements only, due to downloading flexible jumper cable is not easy, given the flexible cable prices are relatively cheap compared with the risk of pen-jumperan
Note:
Your attitude treats greatly affect the life of mobile phones. For example, flanking jeans pocket, put it in a bag without gloves, being careless, so dropping it, or accidentally making kecemplung to water.
The way to charge your mobile phone have also contributed to the health of mobile phone batteries, which eventually led to "coma" in Integrated Circuit Power on phone machines.
To check the health of your phone, you can visit the official service center belonging to the vendor, or search for alternative treatments at affordable costs in mobile phone repair center. Only, you have to choose where repairs have a good reputation, so that is not easily fooled!
Here it is, 10 kinds of damage to the phone most frequently (most often does not mean a major indication) occurred:
1. Integrated Circuit (IC) Power
IC Power is the core of mobile machinery. Minor symptoms on the phone can lead to most chronic diseases are located in this component. If already at this point, your phone between life and death.
Causes damage to the IC Power generally occurs due to the electricity network at the time to charge your cell phone unstable and often go up and down. This is caused by high voltage electricity. So for those of you who live near high voltage power pole, beware of phone damage during charge.
2. Flexi Cable
Generally occur in the folding clamshell phone or cell phone. Flexi Cable is a link between mobile phones and LCD machine. If there is damage to these components, the LCD on the phone will be blank or die. The cause, the phone is often exposed to water and fell.
3. LCD (Liquid Crystal Display)
Damage to the LCD screen is generally caused by mobile phones often fall. It is indeed common, but with different levels of damage. If the screen is "coma", is definitely your phone LCD, a great disorder. Like it or not, you have to replace it.
4. Lights
Phone lights not functioning well, it could be because the phone is often exposed to water or moisture. Plastic cell phone holster also has an effect that is rarely opened. Minimal open glove once a week to provide fresh air for your cell phone.
5. IC Plus
If your phone has numerous features and applications, beware.
Operation menu impatient or wants to damage the phone. For example, after playing games, you simply press a button off (End Call), or without via Exit.
This causes the system software that works according to the rules on phone sulk. Alias IC plus phone interrupted work patterns.
To avoid this, follow the rules of the game on a mobile phone by diligently reading the guide books. Be careful when deleting an application on the phone. IC Plus damage can also be caused due to the application on a mobile explorer accidentally erased.
6. IC RAM
Phones with internal or external memory is vulnerable to viruses on mobile phones. Indiscriminate use of Bluetooth when you to transfer or download the data, it became the most risky path.
In addition to the virus caused damage to the IC RAM is also caused by broken your mobile phone. The memory capacity is not balanced with the amount of data you input. So, consider the extent to which the phone memory can be menyiman photos or songs.
7. IC Power Amplifier (PA)
PA IC performance is very dependent on your position when using the phone. If you are in the building, basement, or being out of town away from the location of base stations, PA IC performance in the search for a signal to be less than the maximum.
Well, if you're not in that condition, but the signal is still not stable, this is a sign of IC PA your phone is damaged. Causes of damage was similar, the phone fell, hit the water, so that the IC PA shorted out and burned.
8. IC Audio
If the audio functions on the phone was not optimal, so the phone does not ring.
This device is on the speaker or buzzer (sound ringtone). Speaker phone does not work when prisoners speaker feet are not tight or not attached to the machine.
To check this, press the speaker and ask someone you call your cell phone. If the speakers still do not read, the time you have to visit the repair center.
9. Keypad and keytone (for android QWERTY)
Dirt coming into the sidelines keypad is the culprit of damage to the keypad. If it still can be cleaned up and the keypad is functioning normally, you do not need to pay service. But if the keypad has entered IC fine dirt or splashes of water are often on the keypad, you should fix it immediately.
10. Camera
If the camera is not functioning properly, there are only three possibilities. First, the ad has deceived you (kasian once you fooled: P).
Second, the software on the phone is corrupt or damaged. Symptoms easy. Picture seemed perfect on the screen, light is not bright, or broken images.
Third, the camera on the mobile phone hardware has been damaged or not working properly
Tidak ada komentar:
Posting Komentar